轉矩量儀專場,轉矩量儀商家多、資料全面阿儀網

BTG-36CN轉矩量儀

日本東日牌ATG/BTG手持式扭矩表/轉矩量具/手持型轉矩量具

型號		測量范圍
公制	牛頓	最大—最小(左右)	最小刻度
45ATG	ATG045CN	gf.cm(cN.m)	gf.cm(cN.m)
45ATG	ATG045CN	5-45(0.05-0.45)	1(0.01)
90ATG	ATG09CN (-S)	10-90(0.1-0.9)	2(0.02)
150ATG	ATG1.5CN(-S)	20-150(0.2-1.5)	2(0.02)
300ATG	ATG3CN(-S)	30-300(0.3-3)	5(0.05)
600ATG	ATG6CN(-S)	60-600(0.6-6)	10(0.1)
1200ATG	ATG12CN(-S)	100-1200(1-12)	20(0.2)
2400ATG	ATG24CN(-S)	300-2400(3-24)	50(0.5)
2400ATG	ATG24CN(-S)	kgf.cm(CN.M)	kgf.cm(CN.M)
1.5BTG	BTG15CN(-S)	0.2-1.5(2-15)	0.02(0.2)
2.4BTG	BTG24CN(-S)	0.3-2.4(3-24)	0.05(0.5)
3.6BTG	BTG36CN(-S)	0.4-3.6(4-36)	0.05(0.5)
6BTG	BTG60CN(-S)	0.6-6(6-60)	0.1(1)
9BTG	BTG90CN(-S)	1-9(10-90)	0.1(1)
15BTG	BTG150CN(-S)	2-15(20-150)	0.2(2)

2TM400CN東日TM指針式轉矩量儀

型式		扭力調整范圍				全長	全高	徑范圍檢查直	重量約
		最少最大		刻度
		最少最大		刻度
		cN.m	gf.cm	cN.m	gf.cm	mm	mm	mm	kg
4TM10MN-S	4-TM100	1-10	10-100	0.2	2	252	105	Ø14 ~ Ø110	3
4TM15MN-S	4-TM150	1.5-15	15-150	0.5	5
4TM25MN-S	4-TM250	2.5-25	25-250	0.5
4TM50MN-S	4-TM500	5-50	50-500	1	10
4TM75MN-S	4-TM750	8-75	80-750	2	20
3TM10CN-S	3-TM1	cN.m 1-10	kgf.cm 0.1-1	cN.m 0.2	kgf.cm 0.02
3TM15CN-S	3-TM1.5	1.5-15	0.15-1.5	0.5	0.05
3TM25CN-S	3-TM2.5	2.5-25	0.25-2.5	0.5	0.05
3TM50CN-S	3-TM5	5-50	0.5-5	1	0.1
3TM75CN-S	3-TM7.5	8-75	0.8-7.5	2	0.2
2TM100CN-S	2-TM10	10-100	1-10			331	133	Ø18 ~ Ø190	10.5
2TM150CN-S	2-TM15	20-150	2-15
2TM200CN-S	2-TM20	30-200	2-30	5	0.5
2TM300CN-S	2-TM30	30-300	3-30
2TM400CN-S	2-TM40	40-400	4-40
2TM500CN-S	2-TM50	50-500	5-50	10	1
2TM600CN-S	2-TM60	60-600	6-60
2TM750CN-S	2-TM75	80-750	8-75

2TME180CN東日TME轉矩量儀系列瓶蓋扭力測試儀

數字顯示式轉矩量儀用于檢測容器端蓋緊固與松開轉矩，強度等

型號	扭力調整范圍CN。M		測量數據的內存數	尺寸 mm	重量約 KG
	最小~最大	1刻度
2TME180CN	36~180	0．2	50次測量	全長331 全寬235 全高280	12
2TME450CN	90~450	0.5
2TME900CN	180~900	1
3TME9CN	1．8~9	0．01		全長220 全寬150 全高153	3．5
3TME18CN	3．6~18	0．02
3TME45CN	9~45	0．05
3TME90CN	18~90	0．1

BTG15CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG150CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG90CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG60CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG36N-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG24CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG24CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge

For measurement of micro torquecalibration of torque tools.


	TGTCL Calibration Kit for ATG/ BTG

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±2%

Model			Torque Range						Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	Min.-Max.			Graduation			Overall Lgth.		Outside Diameter		Chuck Grip		Weight Approx
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	mm	in.	kg	oz.
ATG045CN	45ATG	ATG06Z	cN.m 0.05-0.45	gf.cm 5-45	in.oz 0.06-0.60	cN.m 0.01	gf.cm 1	in.oz 0.01	90	3- 7/8	43.5	1 23/32	ø1 ~ ø6.5	3/64 ~ 1/4	0.18	6 3/8
ATG09CN-S	90ATG-S	ATG1.5Z-S	0.1-0.9	10-90	0.2-1.5	0.02	2	0.02
ATG1.5CN-S	150ATG-S	ATG2.4Z-S	0.2-1.5	20-150	0.3-2.4	0.02	2	0.05
ATG3CN-S	300ATG-S	ATG4.5Z-S	0.3-3	30-300	0.5-4.5	0.05	5	0.1
ATG6CN-S	600ATG-S	ATG9Z-S	0.6-6	60-600	1-9	0.1	10	0.2
ATG12CN-S	1200ATG-S	ATG18Z-S	1-12	100-1200	2-18	0.2	20	0.5
ATG24CN-S	2400ATG-S	ATG36Z-S	3-24	300-2400	4-36	0.5	50	0.5
-	-	BTG60Z-S	-	-	6-60	-	-	1	118	5 9/32	64.2	2 17/32	ø1 ~ ø8.5	3/64 ~ 11/32	0.52	18 3/8
-	-	BTG120Z-S	-	-	10-120	-	-	2
BTG15CN-S	1.5BTG-S	1.5BTG-A-S	2-15	kgf.cm 0.2-1.5	in.lbs 0.1-1.5	0.2	kgf.cm 0.02	in.lbs 0.02
BTG24CN-S	2.4BTG-S	2.4BTG-A-S	3-24	0.3-2.4	0.3-2.4	0.5	0.05	in.lbs 0.02
BTG36CN-S	3.6BTG-S	3.6BTG-A-S	4-36	0.4-3.6	0.4-3.6	0.5	0.05	0.05
BTG60CN-S	6BTG-S	6BTG-A-S	6-60	0.6-6	0.6-6	1	0.1	0.1
BTG90CN-S	9BTG-S	9BTG-A-S	10-90	1-9	1-9	1	0.1	0.1
BTG150CN-S	15BTG-S	15BTG-A-S	20-150	2-15	2-15	2	0.2	0.2

Memory pointer on sideon top of dial face (not shown in picture)are standard
ATG-S overall length with top pointer is 4-1/16"
ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

国产精品女教师在线,先锋资源在线视频,日本免费亚洲视频,久久综合伊人77777永久域名

BTG-36CN轉矩量儀

2TM400CN東日TM指針式轉矩量儀

2TME180CN東日TME轉矩量儀系列瓶蓋扭力測試儀

BTG15CN-S日本東日轉矩量儀

BTG150CN-S日本東日轉矩量儀

BTG90CN-S日本東日轉矩量儀

BTG60CN-S日本東日轉矩量儀

BTG36N-S日本東日轉矩量儀

BTG24CN-S日本東日轉矩量儀

ATG24CN-S日本東日轉矩量儀

最新產品